Wireless Technologies

Correct Answer: RADIUS Server

The correct answer is RADIUS Server. WPA2-Enterprise setups require a RADIUS Server, which stands for Remote Authentication Dial-in User Service. It provides better security than WPA2-Personal by implementing EAP (Extensible Authentication Protocol) to authenticate each user individually. This removes the risk of the network's security being compromised if one person's credentials are discovered, as every user will have their own unique set of login credentials. On the other hand, a DHCP Server, SSL VPN and WPS are not mandatory components of a WPA2-Enterprise setup. A DHCP Server is responsible for assigning IP addresses to devices on a network, but this is not specific to WPA2-Enterprise. SSL VPNs are a type of VPN that can be used to provide secure access to a network from remote locations, but again, it is not specific to WPA2-Enterprise. WPS, or Wi-Fi Protected Setup, is a feature that makes it easier to connect devices to a Wi-Fi network without typing in a password. However, it is not a mandatory part of a WPA2-Enterprise setup.

Correct Answer: Wireless Bridge

Wireless Bridge is the most appropriate choice because it acts as a connector that allows two wireless access points to communicate with each other. This is the perfect solution for a company who wants to extend their Wi-Fi coverage to a new office that is located 75 meters away. On the other hand, a Wi-Fi Range Extender is not as reliable for such a distance, as its typical range is around 50 meters. It also tends to have issues with decreased bandwidth. A Wi-Fi Mesh Network is more appropriate for larger areas that require many nodes, such as a large campus or series of buildings. Finally, an Access Point is primarily used to connect wireless devices to a wired network, but would not be ideal as a standalone solution for extending Wi-Fi coverage to the specified distance.

Correct Answer: Microwave Oven

The correct answer is Microwave Oven. A 2.4GHz Wi-Fi network operates on a frequency close to that shared by a Microwave Oven. When a Microwave Oven is in use, it can emit signals in the 2.4GHz frequency range and cause interference. DECT Phone is not the correct answer because most DECT phones operate at different frequencies above 2.4GHz, so they are less likely to interfere with a 2.4GHz Wi-Fi network. Bluetooth Device operates on the 2.4 GHz band as well but uses frequency-hopping spread spectrum which minimizes their potential for interference. The Infrared Device option is also not likely as these devices use infrared light, which is a completely different range of frequencies compared to 2.4GHz Wi-Fi signals.