Emergency Management

Emergency response planning and drills, incident command, business continuity and disaster recovery, fire prevention and protection systems, hazardous materials transport security, and workplace violence prevention.

5 minutes 5 Questions

Emergency Management, within the Certified Safety Professional (CSP) body of knowledge, is the systematic process of preparing for, responding to, recovering from, and mitigating emergencies that threaten people, property, operations, and the environment. The CSP is expected to understand and apply…

Concepts covered
Security Threats: Terrorism, Spills and Cyber IncidentsEmergency Plan Drills and MaintenanceFire Detection, Alarm and Suppression SystemsEmergency Response Plan DevelopmentIncident Command SystemFire Chemistry and Fire PreventionPortable Extinguishers and Fire Protection Water SupplyHazardous Materials Transportation and SecurityDisaster Response and Recovery PhasesBusiness Continuity and Contingency PlanningAll-Hazards Planning: Weather, Disasters and UtilitiesWorkplace Violence Prevention Programs
Test mode:
Start practice test

CSP - Emergency Management Example Questions

Test your knowledge of Emergency Management

Question 1

In the incident command system (ICS), which of the following BEST describes unified command?

Correct Answer: Agencies with jurisdiction jointly set objectives under one incident action plan

Unified command lets every agency with jurisdictional or functional responsibility share incident leadership. Their representatives work from a single command post, jointly set common objectives and strategies, and carry them out under one incident action plan, without any agency giving up its own authority or accountability.
Having one agency's senior officer direct everyone describes single command, not shared command.
Keeping separate command posts linked only by liaison officers breaks unity of command and invites duplicated or conflicting efforts.
An area command overseeing several incidents, each with its own team, is a different ICS structure used for multiple incidents, not joint command of one incident.
Key concept: ICS unified command for multijurisdictional incidents.

Question 2

A manufacturing plant keeps separate plans for fire, tornado and utility failure. During a tornado drill, a simulated power loss disabled the paging system that the tornado plan relied on. The utility-failure plan then sent workers to an outdoor assembly area, while the tornado plan called for interior shelter. The safety manager is advising leadership on how to revise the plans. Which revision BEST addresses the drill findings?

Correct Answer: Merge into one base plan with hazard annexes that address cascading utility loss

An all-hazards base plan with hazard-specific annexes coordinates the common functions (communications, alerting, assembly, command) and lets annexes handle cascading events like a tornado that knocks out power. Conflicting stand-alone instructions are eliminated at the source.
A standby generator fixes one paging failure but leaves the plans contradicting each other on where to send workers. Repeating the hazard vulnerability analysis only re-ranks risks. It does not resolve the conflicting protective actions. A single incident commander picking which plan governs forces improvised decisions mid-emergency instead of building integrated procedures in advance.
Key concept: all-hazards emergency planning, meaning a base plan with functional and hazard-specific annexes that addresses cascading and compound events.

Question 3

A maintenance shop cleans parts in an open dip tank of solvent whose flash point is below normal room temperature. Last week, sparks from a nearby bench grinder ignited the vapor layer above the tank and caused a brief flash fire. No one was injured. The plant manager asks the safety manager which single change would BEST prevent another ignition at this tank. Which recommendation should the safety manager make?

Correct Answer: Substitute a cleaner whose flash point is well above the shop temperature

Substituting a cleaner whose flash point is well above shop temperature means the liquid no longer gives off enough vapor to form an ignitable mixture at the tank, which removes the fuel hazard at its source.
Local exhaust that holds vapor below the upper flammable limit is the wrong target, because concentrations below the upper limit can still be within the flammable range. Exhaust must keep vapor below the lower flammable limit, and even then it is an engineering control that can fail.
Moving grinding away and requiring hot work permits controls only one ignition source and depends on people following procedures.
A fusible-link cover acts only after a fire has already started.
Key concept: hierarchy of controls, where substitution beats engineering and administrative controls.

More Emergency Management questions
267 questions (total)
Practice 100 questions
One session at a time, always new questions